NAT vs Proxy Network Address Translation (NAT) is the process that modifies the IP address in a header of an IP packet, while it is travelling through a routing device. NAT allows one set of IP addresses to be used for traffic within a LAN (Local Area Network) and another set of IP addresses for […]
Difference Between VLAN and VPN
VLAN vs VPN VLAN (Virtual Local Area Network) is a set of hosts that communicate with each other as if they were connected to the same switch (as if they were in the same domain), even if they are not located at the same physical location and not connected to the same switch. VLANs allow […]
Difference Between Centralised Routing and Distributed Routing Protocols
Centralised Routing vs Distributed Routing Protocols Routing is the process of choosing which paths to be used to send network traffic, and sending the packets along the selected sub network. In computer networking terminology, a routing protocol defines how nodes in networks (specifically routers) interact with each other, to decide which paths to choose for […]
Difference Between Centralized Routing and Distributed Routing
Centralized Routing vs Distributed Routing | Centralised Routing vs Distributed Routing Routing is the process of choosing which paths to be used to send network traffic, and sending the packets along the selected sub-network. Centralized routing model is a routing model in which routing is centrally carried out using a centralized database. On the contrary, […]
Difference Between IDS and IPS
IDS vs IPS IDS (Intrusion Detection System) are systems that detect activities that are inappropriate, incorrect or anomalous in a network and report them. Furthermore, IDS can be used to detect whether a network or a server is experiencing an unauthorized intrusion. IPS (Intrusion Prevention System) is a system that actively disconnects connections or drops […]
Difference Between Unicasting and Multicasting
Unicasting vs Multicasting In computer networking, unicast refers to transmitting information from one sender to a one receiver. So unicasting involves only two nodes in a network. The single receiver in unicasting is identified by a unique address. On the other hand, Multicasting refers to transmitting information in a single transmission to a group of […]
Difference Between Flow Control and Congestion Control
Flow Control vs Congestion Control Flow control is a mechanism used in computer networks to control the flow of data between a sender and a receiver, such that a slow receiver will not be outran by a fast sender. Flow control provides methods for the receiver to control the speed of transmission such that the […]
Difference Between Encapsulation and Tunneling
Encapsulation vs Tunneling Encapsulation and tunneling are two important concepts found in Computer Networking. Tunneling is a method used to transfer a payload (a frame or a packet) of one protocol using an internetwork infrastructure of another protocol. Because the transmitted payload belongs to a different protocol it cannot be sent as it is created. […]
Difference Between Static VLAN and Dynamic VLAN
Static VLAN vs Dynamic VLAN Virtual Local Area Network (VLAN) is a set of ports selected by the switch as belonging to the same broadcast domain. Typically, all ports carrying traffic to a particular subnet address would belong to the same VLAN. Static VLANs are VLANs that are manually configured by providing a name, VLAN […]
Difference Between Client Server and Peer to Peer
Client Server vs Peer to Peer Client server and peer to peer are two network architectures. In the client server architecture, tasks or workloads are partitioned between servers, and services are requested by clients. Usually, clients and servers communicate through a computer network, but they can also reside on the same system. In peer to […]
- « Previous Page
- 1
- …
- 3
- 4
- 5
- 6
- Next Page »