Difference Between Coagulation and Flocculation in Water Treatment

Key Difference – Coagulation vs Flocculation in Water Treatment
 

Water treatment is an important aspect which involves many different steps. Since water treatment is a very sensitive and important process it requires the presence of both physical and chemical processes. Restoration of water quality is assured during water treatment. Coagulation and flocculation steps are important aspects in the context of water treatment since it allows the separation of suspended particles present in water effectively. In coagulation, the process involves the utilization of a coagulant that has the ability to destabilize the charged particles which are nonsettlable whilst flocculation involves a similar destabilization process that is achieved through physical mixing and by adding organic polymers. The key difference between coagulation and flocculation in water treatment is that the coagulation is a chemical process while flocculation is a physical process.

CONTENTS

1. Overview and Key Difference
2. What is Coagulation in Water Treatment
3. What is Flocculation in Water Treatment
4. Similarities Between Coagulation and Flocculation in Water Treatment
5. Side by Side Comparison – Coagulation vs Flocculation in Water Treatment in Tabular Form
6. Summary

What is Coagulation?

Coagulation, in simple terms, is referred to as curdling or clotting. In the chemical aspect, it could be explained as a process by which destabilizes the charges of particles which are not settling down. This is an important step in many different biochemical processes. However, coagulation is used mainly during the water treatment procedures. Coagulation could be achieved simply by adding a coagulant to the medium. This causes the clumping of particles. In respects to the chemistry of this procedure, adding a coagulant destabilizes the particle’s charges. This is achieved by adding a coagulant that possesses an opposite charge to that of the suspended solids.

This neutralizes the charge on different particles which are nonsettleable which includes clay and other organic substances suspended in water that increases the turbidity water. Coagulants include inorganic salts of aluminum or iron.  Examples are aluminum sulfate, aluminum chloride, alum and ferric sulfate. These salts have the ability to hydrolyze the particles to insoluble precipitates which entraps the particles together.

Once the coagulants are added and the charges of the particles are neutralized, it allows the particles to interact with each other and stick together. These joined particles are referred to as microflocs. But these particles are not visible to the naked eye. This step is followed by flocculation.

What is Flocculation?

Flocculation involves the formation of flocs. This is mainly achieved through the physical and mechanical process that is involved with the already coagulated clumps to join together. This results in the formation of large masses of flocs which initially appear as a cloud and then converted into a precipitate. Flocculation is an important step in water treatment procedures which is always followed by coagulation step.

During the flocculation procedure, the solution which is coagulated already is mixed gently. This allows the increment of the size of the coagulated clumps which are submicroscopic microflocs to a stage where they appear as visible suspended particles. Therefore, the large clumps or the large precipitate could be easily separated and removed from the medium. The slow mixing procedure of flocculation allows the contact of microflocs with each other which induces inter-microfloc collisions.

These collisions induce the formation of bonds between microflocs and results in the formation of larger particles which are visible. When mixing continues, the floc size gradually increases. This process is assisted by the addition of organic polymers that possess high molecular weight. These are also referred to as coagulant aids. The addition of organic polymers results in different aspects. This allows the bridging and strengthening the floc which increases the weight of floc while also increasing the rate of settling.

Flocculation is completed once the floc reaches its optimum strength and size. This usually takes an hour depending on the size of the medium. Once flocculation is completed, the water is eligible to undergo separation processes.

What are the Similarities Between Coagulation and Flocculation in Water Treatment?

• Coagulation and flocculation are two main and important steps in drinking and wastewater treatment.
• Both processes involve the union of different suspended particles together.

What is the Difference Between Coagulation and Flocculation in Water Treatment?

Summary – Coagulation vs Flocculation in Water Treatment 

Treatment of water is a very sensitive and important process. It requires the presence of both physical and chemical processes. Coagulation and flocculation steps are important aspects in the context of drinking and wastewater treatment since it allows the separation of suspended particles present in water effectively. Coagulation is a chemical process and flocculation is a physical process, In coagulation, the process involves the utilization of a coagulant that has the ability to destabilize the charged particles which are not settleable whilst flocculation involves a similar destabilization process that is achieved through physical mixing and by adding organic polymers. This is the difference between coagulation and flocculation.

Download the PDF Version of Coagulation vs Flocculation in Water Treatment

You can download PDF version of this article and use it for offline purposes as per citation note. Please download PDF version here Difference Between Coagulation and Flocculation in Water Treatment

Reference

1.“Flocculants & Coagulants.” ChemTreat. Available here
2.“Coagulation-Flocculation.” Coagulation-Flocculation | SSWM. Available here  

Image Courtesy:

1.’The coagulation and filtration processes at a drinking water treatment plant. (14868618507)’ By USEPA Environmental-Protection-Agency . (Public Domain) via Commons Wikimedia 
2.’Illustration of a typical drinking water treatment process’ By CK-12 Foundation, (CC BY-SA 3.0) via Commons Wikimedia